What's in the box? - Pneumatic Fittings Case

As we organize our lab in preparation for the 2018 FRC Game Power Up. We are going to detail what we keep in all our cases and bins. Every team has their own way of organizing things but we feel like giving teams an example would be helpful. If you have a system or tip that you think might help us let us know in the comments.

We are going to kick this off with our "Pneumatic Fittings Case". Freshly organized after purchasing new 5/32" tube fittings to use where we don't need the air flow ability of 1/4" tube. 5/32" tube is smaller and easier to route through the robot.

1. 10-32 to 1/4" Tube Elbow

2. 1/4" Tube coupler

3. inline regulator & flow controls

4. 1/8" NPT to 1/4" Tube

5. 1/8" NPT to 1/4" Tube Elbow

6. 1/4" Plug

7. 10-32 to 1/4" Tube Straight

8. 1/8" NPT to 1/4" Flow Control

9. NPT couplers

10. 1/8" NPT Plugs

11. Pressure Relief Valves & noise reducers

12. 1/4" female to 1/8" female NPT reducer

13. 1/4" T- Fittings

14. Miscellaneous

15. NPT T Fittings

16. Tubing Cutter

17. 1/4" Plugs

18. 1/8" NPT Female to 1/4" Tube T-Fitting

19. 1//4" to 5/32" Tube Fitting

20. 5/32" Inline Flow Control

21. 5/32" Plugs

22. 1/8" NPT to 5/32" Tube Straight

23. 10-32 to 5/32" Tube Elbow

We need to find a place for a roll of teflon tape, as well as add in the 5/32" T-Fittings when we get those in.

- Spectrum "For every minute spent organizing, an hour is earned. ~ Benjamin Franklin"